基于地质雷达与孔内摄像的爆破防漏施工方法

为了解决在裂隙溶洞岩体条件下,散装炸药由于良好的流动性,容易发生炸药泄漏,形成安全隐患并影响爆破效果的问题。结合具有典型喀斯特地貌特征的贵阳龙洞堡机场三期扩建工程中露天爆破施工的实际情况,以检测数据为基础,提出了一种适用于不良地质条件的散装炸药施工新方法。设计前,对爆区采用地质雷达进行地质检测,探测地下溶洞等不良构造,基于探测数据有针对性的进行爆破设计;使用孔内摄像技术对炮孔内部条件进行检测,从而确定可能发生炸药泄漏的位置。在施工过程中,采用分段装药、包装炸药隔离、高强度聚乙烯膜柔性隔离等技术控制炸药泄漏。在龙洞堡机场扩建工程的露天爆破中应用结果表明,合理运用该技术,可以有效避免混装炸药因泄漏而流失,从而改善裂隙岩体条件的爆破效果。     

干熄焦锅炉炉管失效机理分析

通过对干熄焦锅炉炉管及腐蚀产物开展系统研究，提出炉管失效原因为氧化/硫腐蚀＋高温粉尘冲刷。长寿命炉管仅耐磨层发生了较为严重的氧化及硫腐蚀，而近基体层发生了轻微氧化及硫腐蚀，基体只发生了轻微氧化；短寿命炉管耐磨层、近基体层以及基体裂纹内均发生了较为严重的氧化及硫腐蚀，且存在珠光体球化、内表面产生全脱碳层等缺陷。推测短寿命炉管存在超温现象，而超温可加剧氧化及硫腐蚀反应。此外，短寿命炉管遭受了较为严重的高温粉尘冲刷，不仅可造成炉管减薄，还会导致炉管表面温度升高。因此，减少循环气体中粉尘量尤其是大颗粒，可有效减弱冲刷以及控制炉管表面温度，是提高炉管使用寿命的关键。     

流量替代渗透率评价破碎性储层工作流体伤害程度

若地层岩石整体强度偏低,在力学环境改变后岩石易破碎成不规则破裂体,则储存油气资源的此类破碎地层被称为破碎性储层。由于破碎性储层在纵向上存在着较强的非均质性,通过测试单个柱塞岩样在工作流体伤害前后的渗透率变化难以体现工作流体对储层的整体伤害程度。为此,利用达西定律先从理论上探讨用流量替代渗透率定量表征储层伤害程度的可行性,再开展单层开采、双层及三层并采的流量测试实验,评价工作流体对单层、多层储层的整体伤害程度,并将流量损害率与渗透率损害率进行对比以求证流量替代渗透率的可行性。研究结果表明:①单层开采时,流量损害率与渗透率损害率基本一致,渗透率损害率是流量损害率的一种特殊形式;②双层及三层并采时,单层各自稳定流量损害率与渗透率损害率接近,且流量损害率可以定量表征并采储层的整体伤害程度,而渗透率损害率则无法定量表证;③稳定流量损害率较累积流量损害率更接近渗透率损害率。结论认为,测定稳定流量可以替代测定渗透率评价工作流体对破碎性储层的伤害程度,从而为优选工程技术与评价工作流体的适应性提供了方法依据。     

渤海海域莱州湾凹陷高硫稠油成因及其成藏模式

现今渤海海域仅在莱州湾凹陷发现了规模型高硫油油田，其原油性质复杂，来源及成因认识不清。在大量实验数据分析的基础之上，利用地球化学分析方法和盆地模拟手段对莱州湾凹陷各油田油气来源及成因做了详细研究，结果表明：①莱州湾凹陷主要发育了沙三段和沙四段两套有效的烃源岩，陡坡带和中央构造带上各构造原油主要来源于主洼沙四段烃源岩，缓坡带上各构造原油表现为主洼沙四段和南次洼沙四段双洼供烃的特征；②沙四段地层沉积时期存在水体分隔，南次洼水体更加咸化易形成富硫干酪根，其烃源岩分布范围控制着高硫油的分布范围，是高硫油形成的主控因素。而生物降解作用，一方面导致原油稠化是形成稠油的主要原因，另一方面使原油硫含量相对富集，是形成高硫油的重要因素；③垦利16-1油田具有晚期成藏的特点，形成了咸化湖盆早生、早排双洼供烃成藏模式，深、浅地层成藏模式不同，深部地层为典型不整合面侧向输导远源成藏模式。认为南次洼南部古近系地层和潜山优质储层是油气聚集的有利区带，可作为下一步油气勘探的有利方向。     

破碎围岩回采巷道锚网索支护参数优化

针对镇城底煤矿8"煤层工作面巷道围岩破碎、支护困难等问题,分析了原有巷道支护方式失效的原因,进而针对性的优化了巷道支护参数,采用①20 mm X 2500 mm左旋螺纹钢锚杆,①17.8 mm X 6500 mm锚索,并进行了验算。最后通过现场实测巷道顶板离层量得到有效的控制,实现了安全髙效开采。     

煤矿岩巷快速掘进技术的探讨

随着煤矿开采强度的增大,采掘接替紧张问题已经成为限制煤炭产量进一步提升的障碍。要想缓解采掘接替紧张的情况,就要实现巷道的快速掘进。虽然煤巷的快速掘进问题已经解决,但是,岩巷的快速掘进是难点。简要阐述了目前常用的几种岩巷掘进技术,在此基础上分析了实现岩巷快速掘进的方法,以期为采矿掘进技术人员日后工作的顺利进行提供参考。     

RESERVOIR PROPERTIES OF BARREMIAN – APTIAN URGONIAN LIMESTONES,SE FRANCE,PART 1: INFLUENCE OF STRUCTURAL HISTORY ON POROSITY-PERMEABILITY VARIATIONS

Upper Barremian – Lower Aptian inner platform “Urgonian” limestones in the Mont de Vaucluse region, SE France, consist of alternating metre-scale microporous and tight intervals. This paper focuses on the influence of structural deformation on the reservoir properties of the Urgonian limestone succession in a study area near the town of Rustrel. Petrographic, petrophysical and structural data were recovered from five fully-cored boreholes, from the walls of a 100 m long underground tunnel, and from a 50 m long transect at a nearby outcrop. The data allowed reservoir property variations in the Urgonian limestones to be studied from core to reservoir scale. Eleven Reservoir Rock Types (RRTs) were identified based on petrographic features (texture, grain size), reservoir properties (porosity, permeability), and the frequency of structural discontinuities such as fractures, faults and stylolites. Tight and microporous reservoir rock types were distinguished. Tight reservoir rock types were characterised by early cementation of intergranular pore spaces and by the presence of frequent structural discontinuities. By contrast microporous reservoir rock types contained preserved intragranular microporosity and matrix permeability, but had very few structural discontinuities. Observed vertical alternations of microporous and tight rock types are interpreted to have been controlled by the early diagenesis of the Urgonian carbonates. Deformation associated with regional-scale tectonic phases, including Albian – Cenomanian “Durancian” uplift (∼105 to 96 Ma) and Pyrenean compression (∼55 to 25 Ma), resulted in the modification of the initial petrophysical properties of the Urgonian limestones. An early diagenetic imprint conditioned both the intensity of structural deformations and the associated circulations of diagenetic and meteoric fluids. Evolution of the Reservoir Rock Types is therefore linked both to the depositional conditions and to subsequent phases of structural deformation.     

Throughput-based fair bandwidth allocation in OBS networks

Fair bandwidth allocation (FBA) has been studied in optical burst switching (OBS) networks, with the main idea being to map the max-min fairness in traditional IP networks to the fair-loss probability in OBS networks. This approach has proven to be fair in terms of the bandwidth allocation for differential connections, but the use of the ErlangB formula to calculate the theoretical loss probability has made this approach applicable only to Poisson flows. Furthermore, it is necessary to have a reasonable fairness measure to evaluate FBA models. This article proposes an approach involving throughput-based-FBA, called TFBA, and recommends a new fairness measure that is based on the ratio of the actual throughput to the allocated bandwidth. An analytical model for the performance of the output link with TFBA is also proposed.     

节理峰前剪切刚度软化模型及其影响因素分析

节理峰前剪切应力-位移曲线是研究节理剪切行为的重要内容。然而目前对于节理峰前剪切行为大多以线性描述,不能较好的描述非线性的特点。对于非线性的描述也仅仅是唯象描述剪切应力-位移曲线,未能反映影响模型的参数物理意义及影响因素。以峰前节理刚度软化行为为出发点,采用归一化的思想将节理剪切刚度与位移无量纲化,用双曲线函数表示出剪切刚度与位移之间的关系。提出了考虑刚度软化的峰前剪切本构关系,通过与试验结果对比验证了本构关系的合理性。影响该模型最重要的两个因素是初始剪切刚度与峰值剪切位移。以Greenwood和Williamson模型为基础在细观上探讨了初始剪切刚度的影响因素;抓住法向应力与节理粗糙度主要因素,探讨了影响峰值剪切位移的影响因素。对模型参数的研究有助于进一步阐明节理峰前剪切机理。